I have borrowed my Mum’s sewing machine this week and have spent the past couple of evenings whizzing away at it to complete Janet’s cushion cover before she goes to live in the UK for a year.
We had a new fabric shop open in town a few weeks ago so I went hunting for some beautiful material. I didn’t have to look too hard. There is so much beautiful fabric out there! I chose a black and cream theme and decided to get some patterned pieces and some plain pieces, as I explained in part 1. I probably should have looked around for some pre-loved fabric to use but seeing as this is my first experience sewing for ever, I decided to go with a safe option of fabrics that I could easily match and had the same thickness and texture.
1. I decided to make a 40cm cushion cover so I cut 4 pieces of each type of fabric into 12cm squares. This leaves a 1cm seam line.
2. Cut 16 squares the same size out of cream cotton flannelette, and pin them to the backs of the coloured squares.
3. Quilt each square with a simple criss-cross with black cotton leaving a 1 cm seam line.
4. Using the layout photo as a guide, pin the quilted squares together. Join 4 squares to form a row and sew together. Make sure you sew the squares so that the seam comes out through the front (see photo). This will give you the rag style look on the front.
5. Iron the middle seams down flat to make it easier to join the rows together
6. Pin your first row to the next one making sure that the vertical seam lines match up. Sew each row to the next to form your front square which will be 4 little squares across and 4 little squares down.
7. Using a very sharp pair of scissors, snip each exposed hem on the front of the cover to just above the seam line. Space the snips about 1 cm apart to create a ragged fringe.
8. Next, get the black fabric for the back of the cushion cover. Cut to 43 cm wide x 50 cm long. Cut in half lengthways. You should now have 2 pieces that will form the back envelope.
9. Fold one short end on each piece and iron flat. Fold over again and iron flat. Sew along the folded strip to form a hem.
10. Pin the back to the front with the right side facing in. Make sure your 2 black pieces overlap at the back by about 3-5 cm. This will be where you insert your cushion. Sew a seam around the outside edge of the cover to enclose. Turn the right way around through the opening at the back and VOILA! Cushion cover is finished! Pop a cushion insert inside and admire your creation.
11. To finish off the raggy front, wash the cover, line dry and give it a good shake. This should help the front seams to fray further and will finish it off nicely.
If you decide to give this cushion cover a go, I’d love to see your photos! You can post them on the Grow Your Own, Make Your Own Facebook page or tag me in Instagram @growyourown or even just email a pic to me at email@example.com